Next: Comparisons of dirty and
Up: Initial CLEAN image and
Previous: Introduction
AIPS 1: IMAGR: Wide field imaging/Clean task
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INNAME 'KCM51_4+25B7' Input UV data (name)
AIPS 1: INCLASS 'ICLN ' Input UV data (class)
AIPS 1: INSEQ 0 Input UV data (seq. #)
AIPS 1: INDISK 7 Input UV data disk drive #
AIPS 1: SOURCES *all ' ' Source name
AIPS 1: QUAL -1 Calibrator qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: TIMERANG *all 0 Time range to use
AIPS 1: SELBAND 1000 Bandwidth to select (kHz)
AIPS 1: SELFREQ 345000 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: SUBARRAY 0 Sub-array, 0=>all
AIPS 1: DOCALIB -1 If >0 calibrate data
AIPS 1: GAINUSE 0 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0.5 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER -1 Flag table version
AIPS 1: DOBAND -1 If >0.5 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: STOKES ' ' Stokes parameters (see HELP)
AIPS 1: BCHAN 1 Low freq. channel 0 for cont.
AIPS 1: ECHAN 1 Highest freq channel
AIPS 1: CHANNEL 0 Restart channel number
AIPS 1: NPOINTS 1 Number of chan. to average.
AIPS 1: CHINC 1 Channel incr. between maps.
AIPS 1: BIF 1 First IF in average.
AIPS 1: EIF 1 Last IF in average.
AIPS 1: OUTNAME 'KCM51_4+25B7' Output image name (name)
AIPS 1: OUTDISK 7 Output image disk drive #
AIPS 1: OUTSEQ 0 Output seq. no.
AIPS 1: OUTVER 0 CC ver. no (Continuum only)
AIPS 1: *** SET OUTVER ON RESTARTS
AIPS 1: IN2NAME ' ' UV work file name
AIPS 1: IN2CLASS ' ' UV work file class
AIPS 1: IN2SEQ 0 UV work file seq
AIPS 1: IN2DISK 0 UV work file disk
AIPS 1: CELLSIZE 0.044 0.044 (X,Y) size of grid in asec
AIPS 1: IMSIZE 1024 1024 Minimum image size
AIPS 1: NFIELD 1 Number of fields (max. 64)
AIPS 1: DO3DIMAG -1 > 0 => use different tangent
AIPS 1: points for each field
AIPS 1: FLDSIZE *all 0 Size of each field.
AIPS 1: RASHIFT *all 0 RA shift per field (asec)
AIPS 1: DECSHIFT *all 0 DEC shift per field (asec)
AIPS 1: UVTAPER 0 0 (U,V) Gaussian taper
AIPS 1: units are kilo-lambda
AIPS 1: UVRANGE 0 0 Min & max baseline (klambda)
AIPS 1: GUARD -1 -1 x,y guard band fractional
AIPS 1: radius
AIPS 1: ROTATE 0 Rotate image CCW from N by
AIPS 1: ROTATE degrees
AIPS 1: ZEROSP *all 0 0-spacing fluxes and weights
AIPS 1: SEE HELP!!
AIPS 1: UVWTFN 'NA' UV dist. weight function
AIPS 1: blank => uniform
AIPS 1: UVSIZE 0 0 Array size for doing uniform
AIPS 1: weights. 0 -> actual field
AIPS 1: size.
AIPS 1: ROBUST 5 Robustness power: -5 -> pure
AIPS 1: uniform weights, 5 => natural
AIPS 1: UVBOX 0 Additional rows and columns
AIPS 1: used in weighting.
AIPS 1: UVBXFN 1 Box function type when UVBOX
AIPS 1: > 0. 0 -> 1 round pill box.
AIPS 1: XTYPE 5 Conv. function type in x
AIPS 1: default spheroidal
AIPS 1: YTYPE 5 Conv. function type in y
AIPS 1: default spheroidal
AIPS 1: XPARM *all 0 Conv. function parms for x
AIPS 1: YPARM *all 0 Conv. function parms for y
AIPS 1: NITER 20000 Maximum # of Clean components
AIPS 1: BCOMP *all 0 Begin at BCOMP component
AIPS 1: Specify for each field.
AIPS 1: NBOXES 1 Number of boxes for Clean
AIPS 1: NB: field 1 only.
AIPS 1: CLBOX 396 396 Four coordinates for each box
AIPS 1: 628 628 *rest 0
AIPS 1: BOXFILE *all ' ' Input file of field params
AIPS 1: and Clean boxes; ' ' => use
AIPS 1: FLDSIZE, RASHIFT, DECSHIFT,
AIPS 1: NBOXES, CLBOX only.
AIPS 1: OBOXFILE *all ' ' Output file for final Clean
AIPS 1: boxes
AIPS 1: GAIN 0.1 Clean loop gain
AIPS 1: FLUX 0 Minimum Clean component (Jy)
AIPS 1: MINPATCH 0 Min. BEAM half-width in AP.
AIPS 1: BMAJ 0 FWHM(asec) major axis Clean
AIPS 1: restoring beam.
AIPS 1: BMIN 0 FWHM(asec) minor axis Clean
AIPS 1: restoring beam.
AIPS 1: BPA 0 Clean beam position angle
AIPS 1: OVERLAP 0 1 => restore components to
AIPS 1: overlapped fields, 2=> expect
AIPS 1: overlaps while Cleaning
AIPS 1: PHAT 0 Prussian hat height.
AIPS 1: FACTOR 0 Speedup factor see HELP
AIPS 1: CMETHOD 'GRID' Modeling method:
AIPS 1: 'DFT','GRID',' '
AIPS 1: CPARM 12 *rest 0 Task enrichment parameters
AIPS 1: (1) Antenna diameter (m)
AIPS 1: (2) Source Spectral index
AIPS 1: (3) Frequency scaling factor
AIPS 1: (4) >0 => do DFT imaging
AIPS 1: (not allowed for now)
AIPS 1: (5) >0 => scale residuals
AIPS 1: (6) Half-width in x of box
AIPS 1: (7) Half-width in y of box
AIPS 1: (10) multiplier of image size
AIPS 1: to get beam size: 0 => 2;
AIPS 1: 2, 1, 0.5 0.25 supported
AIPS 1: MAXPIXEL 0 Maximum pixels searched in
AIPS 1: each major cycle.
AIPS 1: DOTV -1 Display residuals on TV ?
AIPS 1: Start with field = DOTV
AIPS 1: BADDISK 2 2 Disks to avoid for scratch.
AIPS 1: 2 2 2 2
AIPS 1: 2 2 2 2
2000-08-11