![\begin{figure}
\par\vspace{3.6in}
\special{psfile=/wine/alma/myarea/KAMPDSN-23B7...
...]{578pt}{~~~~~~a) contour and grey scale plots of CLEAN image.}
\par\end{figure}](img1.gif)
Naming convention ----------------- First character: K = (Kogan) ring type array C = (Conway) spiral type array Second character: A, C or E, denoting resolution of array Characters 3-5: Member of SIL- M51, CYG, MAR, SDC or MPD Characters 6 and 7: SN (snapshot) or track, e.g. _4 for 4hr track Characters 8-10: signed declination Characters 11 and 12: Wavelength, e.g. _1 or _3 for 1 and 3mm respectively or b7 corresponding to ALMA band 7 frequency (345GHz)
N.B. An elliptical CLEAN beam appropriate to the +25 declination was used instead of the circularly symmetric one for this -23 degree declination. However the same CLEAN beam was convolved with the model prior to calculating the difference images. The difference images are calculated by subtracting the convolved model from the scaled CLEAN image. The scale factor is (peak flux in convolved model) / (peak flux in CLEAN image).
